PPE

Ear

EN352:2002 Hearing Protectors

Part 1: Ear muffs

Part 2: Hearing protectors. Ear plugs

Part 3: Helmet mounted. Ear muffs

Part 4: Hearing protectors. Safety requirements and testing. Level-dependent ear-muffs

Ear caps (40 pcs. box) – EN 352 SNR 23
High quality ear muffs – EN352 SNR 27
Ear defenders – EN 352 SNR 31
Ear plugs (250 pairs box) – EN 352 SNR 36
Ear defenders very high noise environment – EN 352 SNR 35
Spare Hygien kit for – Ear muffs (20 PAIRS BOX)
Ear defenders – EN 352 SNR 31
Ear defenders very high noise environment – EN 352 SNR 35
Disposable ear plugs w/o cords – (100 PAIRS BOX) – EN 352 SNR 33

Eyes

EN166:2001 - Personal Eye Protection – This standard test for: impact, optical quality, chemical dust and molten metal protection.

EN 175 – Equipment for eye and face protection durin welding and allied processes

Safety Goggles EN166 3 4 B CE
Class 1 lens and 100% UV protection. CE approved to EN166 1F
Safety goggles outer 90° Flip-up support welding filters (diameter 50 mm) EN 166 EN 169 EN 175
Safety goggles (Polycarbonate clear lens) EN 166 – 1-3,4 F
Mask EN166 EN167 EN168 EN169 EN175
Replaceable lens
Safety Glasses clear lens Temple length adjustment EN 166 1F
Safety Glasses UV400 protection anti scratch plus anti fog plus EN 166 1F
Protective eyewear clear lens EN 166 2-1.2 U 1 F CE
Safety Glasses UV400 protection anti scratch plus anti fog plus EN 166 1F
Protective eyewear grey lens EN 166 – EN 172
Safety cryogenic mask EN 166 3 4 9 B

Gloves

EN420:2003 + A1:2009 This standard defines the general requirements for glove design and costruction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information

EN388:2003 Protective gloves against mechanical risks

EN EN407: 2004 Protective gloves against thermal risks

EN12477:2001 Protective gloves for welders

EN1149-1:2006 Protective gloves electrostatic properties

EN374:2003 Protective gloves against chemicals and microorganisms

Gloves grain leather – EN 388
Cotton gloves. Continuous thread knitted in a seamless non-stop process
Nitrile butadiene rubber gloves (NBR). Nitrile coating on cotton jersey liner, canvas cuff. – EN420 EN388
Polyestere and nitryl gloves – EN420 EN388
Polyestere and nitryl gloves – EN420 EN388
Disposable lattex gloves (100pcs. Box) – EN420
Leather gloves – EN388
Disposable latex high risk gloves (50PCS BOX) – EN374.
Natural latex gloves with focking cotton inside, 32CM. EN388 EN374 EN421.
Electric insulation rubber gloves (CLASS 1) – EN 60903
Thermal gloves – EN388 EN407
Double coating PVC gloves – 45 CM – EN 388 EN 374
Double coating PVC gloves – 65 CM – EN 388 EN 374
Latex gloves – EN 388 EN374
Latex gloves – EN374
Polyurethane and nitryl gloves. EN388
Reinforced work gloves grain leather. – EN 388
Cryogenic gloves. EN388, EN511
Cryogenic gloves. EN388, EN511
Cryogenic bovine leather gloves, 45cm – EN388, EN511
Anti-cut gloves – EN388   EN420
Cryogenic gloves. EN388, EN511
Cryogenic gloves. EN388, EN511
Cryogenic bovine leather gloves, 65cm – EN388, EN511

Helmets

EN397:1995 Industrial Safety Helmets – Shock absorption, resistance to penetration, resistance to flame, chin strap anchorage.

EN812: Specifies physical and performance requirements, method of test and marking requirements for industrial bump caps.

Shock absorbent cap. EN812
Ventilated safety helmet in ABS shell UV indicator. EN397
Safety helmet. EN397
Ear defenders with helmet attchment, very high noise environment. EN 352 SNR 31
Helmet visor
Helmet borber
Chin strap for safety helmet. EN398

Masks

Respiratory protection standards

EN136:1998 Respiratory Protection Devices – Full Face Masks

EN140:1998 Respiratory Protection Devices – Half Masks and Quarter Masks

EN143:2000 Respiratory Protection Devices – Particle Filters

EN14387:2004 Respiratory Protection Devices – Gas Filter and Combined Filter

EN149:2001 Respiratory Protection Devices – Half Masks and Quarter Masks

FFP1 non woven synthetic fibre disposable mask. Box of 20.
FFP1 dust disposable mask (box 20pcs.). EN149:2001+A1:2009
FFP2 dust disposable mask (box 20pcs.). EN149:2001+A1:2009
Combination filter A1 B2 E2 K1 HgNO CO 20 P3 R D – EN 14387
½ face mask with two filters. EN140
Full face mask. EN 136
Filter P3 harmful dust. UNI EN 143:2000+A1:2006

Shoes

EN ISO 20345:2011 This international standard specifies basic and additional requirements for safety footwear used for general purposes.

THE CLASSIFICATION SISTEM USED TO IDENTIFY THE PROTECTION PROVIDED BY THE FOOTWEAR IS LISTED BELOW:

SB: The presence of a safety toecap providing protection against impact injury to the toes caused by falling objects.

SBP: As SB standard plus penetration resistance

S1: As SB standard plus closed seat region, anti-static properties, resistance to fuel oil and energy abrasion of seat region.

S1P: As S1 standard plus penetration resistance

S2: As S1 standard plus water penetration and water absorption resistance

S3: As S2 standard plus cleated outsole and penetration resistance

S4: 200 joule toecap protection. All rubber or all polymeric footwear with anti-static properties. Resistance to fuel oil, energy absorption of seat region and closed seat region.

S5: As S4 standard plus cleated outsole and penetration resistance

Safety shoes S1P, split leather, quick release, alluminium toecap. ISO 20345 S1P SRC
Leather boots, aluminium toecap. ISO 20345 S3 SRC
Safety ankle shoes – ISO 20345 S3 CI SRC
Safety shoes. ISO 20345 S3 CI SRC
Grain leather boots, aluminium toecap. ISO 20345 S3 SRC
Wellington safety boots – ISO 20345 S5 CI SRC HRO
Leather boots, shock absorber heel Sole resistant to oil, acid and alkali – EN345 S1P
Cook safety shoes. ISO 20345:2004 S2 SRA
Safety shoes. ISO 20345 S3 SRC
Safety shoes without metallic parts. ISO 20345 S3 CI SRC
Thermo boots EN345 S4
PVC boots, antistatic, antislide, steel toecap. ISO 20345 S5
Wide fitting boots with composite toe cap. Composite anti penetration mid-sole – EN ISO 20345:2011 SRC S3
PVC boots – ISO 20345:2004 S5

Visors

EN166:2001 - Personal Eye Protection – This standard test for: impact, optical quality, chemical dust and molten metal protection.

EN 175 – Equipment for eye and face protection durin welding and allied processes.

PP browguard EN 173.
Safety visor. EN166
Faceshield with front protection. Clear polycarbonate visor with plastic edge. 39 x 20 cm.
Safety visor. EN166
Welding helmet – EN 379 EN 175
Cryogenic safety visor. EN166